Enviro C72I, Руководство пользователя

Страница: 9 / 60

9
a
iR
s
hutteR
(V
entuRi
):
The air shutter plays a very important role in flame appearence and combustion quality. The shutter adjusts
how much air gets mixed with the gas before it ignites. Adjustments can be made to accomodate various
climates and vent configurations.
To gain access to the air shutter remove the safety screen and intake shield. There is a lever underneath the
firebox near the gas valve as shown in Figure 3. Moving the lever to the right will close off the air mixing
with the gas and will make the flame appear more yellow and tall. Moving the lever to the left will open up
the shutter allowing more air to be mixed with the incoming gas; this will make the flames appear more blue
and short.
Figure 3: Air shutter adjustment lever
Operating Instructions
n
oRmaL
s
ounDs
D
uRing
o
peRation
:
Component Sound & Reason
Main Unit Creaking when heating up or cooling down.
Burner Light pop or poof when turned off; this is more common with LP units.
Temperature Sensor Clinking when it senses to turn the blower on or off.
Pilot Flame Quiet whisper while the pilot flame in on.
Blower / Fan Air movement that increase and decreases with the speed of the blower. The
blower is pushing the heat from the fireplace into the room.
Gas Control Valve Dull click when turning on or off, this is the valve opening and closing.
R
emote
c
ontRoL
o
peRations
:
Proflame 2 is a modular remote control system that directs the functions of the C72I. The Proflame
2 transmitter (remote) is configured to control the on/off main burner operation, its flame levels and
provides on/off and thermostatic control of the appliance. The system also controls the optional fan
speed through six (6) levels and can control the operation of the option light kit.
Typically natural gas flames will
require the shutter to be more closed.
Typically LP flames will require the
shutter to be more open.
If you cannot attain the proper flame by
making air shutter adjustments then you
may have the incorrect exhaust restrictor.
If the flame is very flickery, fast moving, and
low then increase the restriction.
If the flame is very tall, lazy, and dirty then
decrease the restriction.
More details can be found in the venting
section of this manual.
Caution: Wear heat resistent gloves
when making adjustments to the air
shutter. Perform adjustments after 15
minutes�
Table 1: Normal Sounds