Enviro Alert EA800, Инструкция по установке и эксплуатации

Страница: 17 / 98

General Information
D-011-0152 13
Water Sensors
Table 8 lists the water sensors available for use with the EA800 Alarm System.
Use of water sensors requires that at least one supervised water sensor be used. Up to five additional
unsupervised water sensors may be added in parallel on the same input where the supervised water sensor is
configured.
Multi-Function Sensors
Multi-function wireless sensors may be connected to a wired sensor to act as a transmitter. Table 9 lists the
multi-function sensor available for use with the EA800 Alarm System.
Contact Closure Sensors
Table 10 lists the contact closure sensors compatible for use with the EA800 Alarm System.
Table 8 EA800 Compatible Water Sensors
Sensor Part Number Description
Operating
Range/Parameters
Water Bug PN M-001-0094 Supervised water sensor
1
1 Water sensors are not effective nor intended for use in distilled or deionized water.
NA
Table 9 EA800 Compatible Multi-Function Sensors
Sensor Part Number Description
Operating
Range/Parameters
Wireless
Multi-Function
PN M-001-0127 Wireless link for sensors. See
page 16 for allowed sensors.
Dependent on sensor
connected.
Table 10 EA800 Compatible Closure Sensors
Sensor Description
NO closure Normally open contact closure such as door contacts, motion detectors,
and glass break sensors
NC closure Normally closed contact closure such as door contacts, motion detectors,
and glass break sensors