34
D-011-0152
Adding Wireless Sensors
Note:
To enter numeric values, use the arrow keys. To advance the cursor to the next digit when entering
numeric values, press the
NEXT
soft key (
F3
). To return to a previous digit, press the
PREV
soft key (
F2
).
The Hysteresis setting helps prevent alarms from being set and reset continually if the environment is at or near the
alarm set point by providing an acceptable variance. For example, if
HYSTERESIS
is set at
1
and the sensor
High
Alarm Limit
is set at
+158
, the sensor reading must decrease to
+157
(+158 minus 1) in order for the alarm condition
to reset to a no-alarm condition.
Note:
Repeat this sensor for each wireless temperature sensor you need to program. When you have finished
programming wireless temperature sensors, proceed to the section appropriate for the other types of
wireless sensors to be added.
F3
Example shown, set
values as appropriate for
your system.
Содержание Alert EA800
