Envipco U48DFF Скачать руководство пользователя

Страница: 11 / 100

1-3

Safety precautions

1.4. Safety precautions

Safety for customers, machine attendants, and service technicians is paramount in the design and con-
tinuing development of the

ULTRA

. Read this manual carefully, and follow all of the safety rules that it

provides.

Warning!

Never use an extension cord to supply power to the

ULTRA

. The

ULTRA

must be plugged into a proper receptacle. If you do not have the correct
receptacle or if it is damaged, notify store personnel.

Warning!

Never service the electrical components while they are powered on.
Always follow the technical data when servicing the electrical compo-
nents.

Warning!

Mechanical components in the

ULTRA

weigh up to 400 pounds.

Always use lifting devices to remove or replace components.

Warning!

To prevent accidental operation that can cause serious injury, only one
person at a time is permitted to work on or near the

ULTRA

during test-

ing or maintenance.

Warning!

Always remove the keys from the machine when you are done with ser-
vice. If untrained people open the machine, they could be seriously
injured.

Warning!

Do not reach into the In-Feed unit while the machine is in operation. If
you must reach into the machine, open the top door first. Opening a
door activates the safety interlock, which stops all moving parts.

Содержание U48DFF





































































































Результаты поиска

Содержание U48DFF

Отзывы:

Похожие инструкции для U48DFF

Бренды по названию

Популярные бренды

Envipco U48DFF, Руководство по обслуживанию

Результаты поиска

Содержание U48DFF

Отзывы:

Похожие инструкции для U48DFF

Бренды по названию

Популярные бренды