Entrya GS-500, Руководство пользователя

Страница: 2 / 40

22 EN Manual GS-500_EN_2014-01
User Manual v1.0
SAFETY INSTRUCTIONS
Please read and follow these safety guidelines to safeguard yourself and others:
• GS
M switch-gate controller GS-500 (later referred to as “the system” or “ the device”) contains a built-in radio transceiver operating in
GSM 850/900/1800/1900 MHz bands.
•
DO NOT use the system where it can cause potential danger and interfere with other devices – such as medical devices.
•
DO NOT use the system in hazardous environment.
•
DO NOT expose the system to high humidity, chemical environment or mechanical impact.
•
DO NOT attempt to repair the system yourself – any repairs must be carried out by fully qualified personnel only
.
Disconnect the mains power before installing. Never install or carry out maintenance during stormy weather. The electric sock-
et that powers the system must be easily accessible.
Please use the 10-24V 50Hz ~200mA AC or 10-24V 200mA DC power supply unit that meets the EN 60950-1 standard.
Any additional device you connect to the system, such as a computer, must also be powered by an EN 60950-1 approved
supply. When connecting the power supply to the system, switching the polarity terminal places does not have any affect.
External power supply can be connected to AC mains only inside installation room
with automatic 2-pole circuit breaker capable of disconnecting circuit in the event
of short circuit or over-current condition. Open circuit breaker must have a gap
between connections of more than 3mm and the disconnection current 5A.
Phase
AC 230V
50 Hz/DC 24V
USB cable
Null
PE
GS-500
AC/DC
To switch the system off, unplug the external electric power supply from or any other linked device that the system is
powered from
A blown fuse cannot be replaced by the user. The replacement fuse has to be of the kind indicated by the manufacturer (fuse
F1 model – MINISMDC050F 0.5A).
If you use a computer for the device configuration, it must be earthed.
The WEEE (Waste Electrical and Electronic Equipment) symbol on this product (see left) means it must not be disposed of in
household waste. To prevent possible harm to human health and/or the environment, you must dispose of this product in an
approved and environmentally safe recycling facility. For further information contact your system supplier, or your local waste
authority.