39
IP2085EN - 2014-09-01
10. Selecting opening direction
Apertura verso destra
DIP2=OFF
Apertura verso sinistra
DIP2=ON
A
A
B
C
85 Nm
- Select the opening direction as shown in the figure.
- Mount the spring using the special screw M12x40 [C] with thread locking compound and tightly
fasten as shown in the figure.
- Set the DIP2 on the control panel EL34 as shown in the figure.
- Once you have installed the bar, adjust the compression of spring QIKM5 using the nuts [B]
until measurement A≥245 mm is obtained.
Righthand opening
Lefthand opening
