Entre Matic HVLS series Скачать руководство пользователя страница 2

Страница: 2 / 28

Group AB 2015

6020031A — Commercial HVLS Fans

November 2016

You may find safety signal words such as DANGER, WARNING, CAUTION or NOTICE throughout this User’s

Manual. Their use is explained below:

Indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided may result in minor or moderate injury.

Notice is used to address practices not related to

personal injury.

This is the safety alert symbol. It is used

to alert you to potential personal injury

hazards. Obey all safety messages that

follow this symbol to avoid possible death or injury.

SAFETY SIGNAL WORDS

Introduction .................................................................2

Safety Signal Words

..................................................2

Safety Practices..........................................................3

Owner

’s Responsibilities

............................................4

Fan Kit ........................................................................5

Hardware ....................................................................6

Installation Considerations .........................................7

Fan Mount ..................................................................9

Components .............................................................12

TABLE OF CONTENTS

Installation ................................................................13

Operating Instructions ..............................................20

Planned Maintenance ...............................................21

Troubleshooting ........................................................22

Fire Control System Fan Shutdown..........................24

Parts List...................................................................25

Warranty

...................................................................27

Distributor Information

..............................................28

INTRODUCTION

Welcome and thank you for choosing this commercial fan from Entrematic
This User's Manual contains basic information that you need to safely install and operate your fan. Please

read and keep this User's Manual before using your new fan. For more information, please consult website at

www.entrematicfans.com.

Содержание HVLS series





























Результаты поиска

Содержание HVLS series

Отзывы:

Похожие инструкции для HVLS series

Бренды по названию

Популярные бренды

Entre Matic HVLS series, Руководство пользователя

Результаты поиска

Содержание HVLS series

Отзывы:

Похожие инструкции для HVLS series

Бренды по названию

Популярные бренды