10
MN-39362 •
Rev 0 • 04/18
• Titan Series
EC1850BL
Combination Blanket/Fluid Warmer
Operation Instructions
NOTICE:
A temporary odor may be noticeable upon initial
start-up of the warmer. Contact manufacturer
if the odor persists aft er a day or more of
continuous use.
Cleaning Agents
Always use the proper cleaning agent at the
manufacturer’s recommended strength . Contact a local
cleaning supplier for product recommendations .
Preparation Before Operating the Warmer
1 . Remove and wash any detachable items such as the
insert assembly with hot, soapy water . Dry the items
with a clean, lint-free cloth .
2 . Clean the interior and exterior of the warmer with
a mild soap and water solution . Apply the solution
with a clean, damp cloth . Do not use commercial or
household cleaners that contain ammonia .
NOTE:
Make sure to wipe the control panel, door vents,
door handle or door button, and door gaskets.
3 . Remove all detergent residue from the interior and
exterior of the warmer with a clean, damp cloth .
4 . Dry the interior and exterior of the warmer with a
clean, lint-free cloth . Leave the door open until the
interior is completely dry .
5 . Sanitize the interior of the warmer with a sanitizing
solution . This solution must be approved for use on
stainless steel surfaces .
6 . Clean the warmer glass with glass cleaner or
distilled vinegar .
7 . Install the insert assembly .
