Installing the Access Point 3-3
Wall/Ceiling Outlet Box Installation
4.
Connect the Ethernet cable.
5.
Before installing the metal mounting bracket, make certain that the mounting holes on
the bracket line up with those on the outlet box.
Additional holes may be drilled in the bracket to accommodate your particular
installation.
6.
Secure the mounting bracket to the wall outlet box.
7.
Secure the AP to the mounting bracket:
— Insert the two AP shoulder screws into the two mounting bracket screw slots.
— Slide the AP down.
— Tighten the captive screw to secure the AP.
NOTE: Remove all drilled material from the area.
S2
S1
MAC
ADD
SN
TUV
Install
Captive Screw
APH_23G
