Wall/Ceiling Outlet Box Installation
3-2 Installing the Access Point
Wall/Ceiling Outlet Box Installation
Follow the step-by-step procedure below to install the Access Point to an outlet box.
1.
Make sure the site primary power for the AP conforms to the specifications detailed in
Chapter 2
- Cabling and Wiring.
2.
Select a wall or ceiling outlet:
— If using remote power, with internal 10BaseT Ethernet network cabling installed.
— If not using remote power, within five feet of an AC electrical outlet:
a)
If using redundant power (connecting both local power and remote
power).
or
b)
If using the local power option and not using the remote power option.
3.
Remove the mounting bracket from the AP:
— Completely loosen the captive screw.
— Slide the bracket until the two screw slots are directly below the two screws.
— Lift and remove the bracket from the AP.
Mounting Bracket
Remove
Captive Screw
Screw Slot (2)
Screw (2)
APH_20
