Desktop Installation
3-14 Installing the Access Point
Desktop Installation
To install the Access Point on a desktop, do the following:
1.
Make sure the site primary power for the AP conforms to the specifications detailed in
Chapter 2
- Cabling and Wiring.
2.
Select a desktop location:
— If using remote power, close to the 10BaseT Ethernet network cable connector.
— If not using remote power, within five feet of an AC electrical outlet:
a)
If using redundant power (connecting both local power and remote
power).
or
b)
If using the local power option and not using the remote power option.
3.
Remove the mounting bracket from the AP:
— Completely loosen the captive screw.
— Slide the bracket until the two screw slots are directly below the two shoulder
mounting screws.
— Lift and remove the bracket from the AP.
Mounting Bracket
Remove
Captive Screw
Screw Slot (2)
Screw (2)
APH_20
