Power Module Installation
2-6 Cabling and Wiring
Power Module Installation
To install the 100-240VAC power supply, perform the following steps:
1.
Verify that you have the correct power supply connector.
2.
Insert the appropriate connector into the power supply.
CAUTION: Do not connect the power supply to the primary source
until instructed to do so.
CAUTION: You must use a UL Listed Class 2 power supply. See
Table 1-3
for the power supply specifications.
R2_06
AU (AS3112 TO IEC-C13)
UK (UK TO IEC-C13)
E
N
L
EU (CEE7 TO IEC-C13)
USA (NEMA 5-15 TO IEC-C13)
R2_07
