ix
Preface
Purpose of the Manual
This manual describes how to install and set up the RoamAbout Access Point 2000. It also
includes problem solving, and connector pin assignment information.
Intended Audience
This manual is intended for use by personnel who will install and set up the RoamAbout
Access Point 2000.
Organization of this Document
This document is organized as follows:
ELECTRICAL HAZARD: Only qualified personnel should perform
installation procedures.
Section
Description
Chapter 1
Contains pre-installation information you should know
before you install the RoamAbout Access Point 2000. This
includes the site requirements and specifications.
Chapter 2
Presents detailed step-by-step procedures to select,
configure, and install the correct power, cabling, and wiring
for your Access Point 2000.
Chapter 3
Contains detailed step-by-step procedures to install the
Access Point 2000 and connect a device to the console port.
Appendix A
Describes how to upgrade the Access Point 2000 firmware.
It also describes how to reset the Access Point to factory
default settings.
