Enterasys Matrix E6 5G102-06-G, Руководство пользователя

Страница: 40 / 196

Main Menu Screen
4-4 Main Menu Screens
Device Control Menu (For details, refer to Chapter 7 .)
Port Configuration
Port Information
Spanning Tree
Configuration
Spanning Tree
Information
Mirror Port Configuration
SmartTrunking
Configuration
IGMP Configuration
Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half
duplex.
Displays operational status, including link state, flow control
method, and duplex mode.
Enables Spanning Tree Algorithm; also sets parameters for hello
time, maximum message age, switch priority, and forward delay;
as well as port priority and path cost.
Displays full listing of parameters for the Spanning Tree
Algorithm.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Configures IGMP multicast filtering.
Extended Bridge
Configuration
802.1P Configuration
802.1Q VLAN Base
Information
802.1Q VLAN Current
Table Information
802.1Q VLAN Static
Table Configuration
802.1Q VLAN Port
Configuration
Static Unicast Address
Table Configuration
Broadcast Storm Control
Configuration
Displays/configures extended bridge capabilities provided by this
switch, including support for traffic classes, and VLAN extensions.
Configures default port priorities and queue assignments.
Displays basic VLAN information, such as VLAN version number
and maximum VLANs supported.
Displays VLAN groups and port members.
Configures VLAN groups via static assignments, including setting
port members.
Displays/configures port-specific VLAN settings, including PVID,
and ingress filtering.
Used to manually configure host MAC addresses in the unicast
table.
Sets the limit on the received broadcast frames that are switched
out to other ports.
Table 4-1 Main Menu Screen Menu Item Descriptions (Continued)
Menu Item Screen Function