Enterasys Matrix E6 5G102-06-G, Руководство пользователя

Страница: 157 / 196

Configuring and Monitoring the Switch 11-1
11
Configuring and Monitoring the Switch
11.1 COMMON TASKS
The switch console menus allow you to modify default switch settings and configure the switch for
network management. They also allow you to monitor switch performance and status. Refer to
Chapters 1 through 9 for an overview of the menu hierarchy and a description of all menus. The
following sections describe common tasks in setting up and operating the switch using the console
menus.
To begin, set operating parameters and make sure the network connections are correct by
performing these tasks:
•
Setting password protection for the switch to prevent unauthorized access to console menus
(
Section 11.2 )
•
Assigning an IP address for the switch if you plan to manage the switch using SNMP, or if you
use Telnet to access the switch (
Section 11.3 )
•
Checking network configuration status and verifying that network connections are correct
(
Section 11.4 )
After the switch is installed and operating, you may want to perform one or more of the following
tasks:
•
Connecting via Telnet for in-band access to the console menus ( Section 11.5 )
•
Setting SNMP parameters for management access ( Section 11.6 )
•
Viewing switch statistics to monitor and evaluate switch performance and traffic patterns on the
network (
Section 11.7 )
•
Configuring Port Mirroring ( Section 11.8 )
•
Downloading a software upgrade ( Section 11.9 )
•
Configuring Spanning Tree parameters ( Section 11.10 )
•
Configuring VLANs ( Section 11.11 )
•
Configuring Class of Service ( Section 11.12 )