Enterasys Matrix E6 5G102-06-G, Руководство пользователя

Страница: 145 / 196

Security Configuration Screen
Security Menu Screens 9-11
Radius /802.1X
Enable Select one of the module global settings to None, Radius, EAPOL
(
Extensible Authentication Protocol
) or Both, which do the following:
NONE – Disables
Radius and/or EAPOL on the module.
RADIUS – Enables
Radius on the module.
EAPOL – Enables
EAPOL on the module.
NOTE: You can enable EAPOL without enabling Radius.
However, EAPOL will not authenticate without Radius enabled,
because Radius is the authentication mechanism.
For more information about EAPOL, refer to Section 9.4.1 .
BOTH – Enable both
Radius and EAPOL on the module
.
The
default setting is NONE.
For more information about enabling Radius, refer to
Section 11.18 .
IP Address Enter the IP address (in decimal-dot format) of the primary and
secondary servers being configured for the RADIUS function.
Secret Enter a secret string of characters for the primary and secondary server
(16 characters are recommended as per RFC 2865). The maximum is
32 characters).
CAUTION: DO NOT exit the Security Configuration
screen after saving your settings to prevent losing
access to Local Management.
Record and save your Secret string entries and make sure to
verify those settings by trying to access the devices via Telnet
on NetSight using your new secret settings.
For details, refer to Section 11.18 for instructions about setting the
Local and Remote server parameters.
Auth Port Enter the number of the Authorization UDP Port for the Primary and
Secondary server. Information will be sent via the port.
Table 9-3 Security Configuration Screen Field Descriptions (Continued)
Use this field… To…