Enterasys Matrix E6 5G102-06-G, Руководство пользователя

Страница: 118 / 196

Static Unicast Address Table Configuration Screen
7-46 Device Control Menu Screens
Status
(Lower right side of screen) Select one of the following status settings that be associated
with the new VID, MAC and Port entries:
Permanent – This entry is currently in use and will remain so
after the next reset of the switch.
DeleteOnReset – This entry is currently in use and will
remain so until the next reset.
Lock Port – Enables the port locking mode. For details, refer
to
Section 11.15.1 .
Unlock Port – Disables the port locking mode. For details,
refer to
Section 11.15.2 .
Invalid – Removes the corresponding entry.
DeleteOnTimeOut – This entry is currently in use and will
remain so until it is aged out. (Refer to Aging Time in
Section 8.4 .)
Other – This entry is currently in use, but the conditions
under which it will remain, differ from the preceding values.
[Show] See the static address table sorted on VID as the primary key
and MAC address as the secondary key.
[More] Scroll through entries in the static address table.
[Set] Add the specified entry to the static address table, such as
shown in the following example:
VID: 1 MAC: 00-00-00-e8-34-22
Unit: 1 Port: 1
Status: Permanent
Table 7-22 Static Unicast Address Table Screen Field Descriptions (Continued)
Use this field... To...