Enterasys G3G170-24, Справочное руководство CLI

Страница: 598 / 679

show ipv6 ospf range
19-42 OSPFv3 Configuration
This example displays the output of this command when a neighbor is specified.
G3(su)->router#show ipv6 ospf neighbor 8.8.8.8
Interface Vlan 45
Area Id 0.0.0.30
Options 0x2
Router Priority 128
Dead timer due in (secs) 33
State Full/DR
Events 6
Retransmission Queue Length 0
Table 19 ‐ 10 provides an explanation of the command output.
show ipv6 ospf range
This command displays information about the area ranges for the specified area.
Syntax
show ipv6 ospf range areaid
Parameters
Defaults
None.
Mode
Router privileged execution: G3(su) ‐ >router#
Table 19-10 show ipv6 ospf neighbor routerid Output Details
Output Field What It Displays...
Interface Interface of the local router.
Area ID OSPFv3 area ID associated with the interface.
Options An integer value that indicates the optional OSPFv3 capabilities
supported by the neighbor. These are listed in its Hello packets.
This enables received Hello Packets to be rejected (that is,
neighbor relationships will not even start to form) if there is a
mismatch in certain crucial OSPFv3 capabilities.
Router Priority Router priority for the specified interface.
Dead Timer Due Amount of time, in seconds, to wait before the router assumes the
neighbor is unreachable.
State State of the neighboring routers.
Events Number of times this neighbor relationship has changed state, or
an error has occurred.
Retransmission Queue Length Integer representing the current length of the retransmission
queue of the specified neighbor router Id of the specified interface.
areaid Specifies the area ID in IP address format (dotted ‐ quad) or as a decimal
value.