Enterasys G3G170-24, Справочное руководство CLI

Страница: 383 / 679

clear nodealias config
Enterasys G-Series CLI Reference 11-33
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
Upon packet reception, node aliases are dynamically assigned to ports enabled with an alias
agent, which is the default setting on G ‐ Series devices. Node aliases cannot be statically created,
but can be deleted using the clear node alias command as described in “ clear nodealias config ” on
page 11 ‐ 33.
Example
This example shows how to disable the node alias agent on
ge
.1.3:
G3(su)->set nodealias disable ge.1.3
clear nodealias config
Use this command to reset node alias state to enabled and clear the maximum entries value.
Syntax
clear nodealias config port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset the node alias configuration on
ge
.1.3
:
G3(su)->clear nodealias config ge.1.3
enable | disable Enables or disables a node alias agent.
maxentries maxentries Set the maximum number of alias entries per ports. Valid range is 0 to
4096. The default value is 32.
port ‐ string Specifies the port(s) on which to enable/disable node alias agent or set
a maximum number of entries.
port ‐ string Specifies the port(s) on which to reset the node alias configuration.