Enterasys G3G170-24, Справочное руководство CLI

Страница: 326 / 679

show cos port-type
8-30 Policy Classification Configuration
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to clear the CoS configuration for all entries except entries 0 ‐ 7:
G3(su)->clear cos all-entries
show cos port-type
Use this command to display Class of Service port type configurations.
Syntax
show cos port-type [ irl [ port-type ]]
Parameters
Defaults
If no parameters are specified, inbound rate limiting information for all port types is displayed.
Mode
Switch command, read ‐ only.
Usage
The G3 implementation provides one default port type (0) for designating available inbound rate
limiting resources. Port type 0 includes all ports.
The port type 0 description is “G3100 IRL,” which indicates that this port type provides a
maximum of 100 inbound rate limiting resources per port group.
Example
This example shows inbound rate limiting information for port type 0.
G3(su)->show cos port-type irl 0
Number of resources: Supported rate types:
irl = inbound rate limiter(s) Kbps = kilobits per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- -----------------
0 G3 100 IRL 100 kbps ge.1.1-48 ge.1.1-4
irl (Optional) Displays inbound rate limiting information.
port ‐ type (Optional) Displays information for a specific port type.