Enterasys G3G170-24, Справочное руководство CLI

Страница: 307 / 679

set policy rule
Enterasys G-Series CLI Reference 8-11
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
Table 8 ‐ 3 provides the set policy rule data values that can be entered for a particular classification
type, and the mask bits that can be entered for each classifier associated with that parameter.
Examples
This example shows how to use Table 8 ‐ 3 to assign a rule to policy profile 3 that will filter Ethernet
II Type 1526 frames to VLAN 7:
G3(su)->set policy rule 3 ether 1526 vlan 7
This example shows how to use Table 8 ‐ 3 to assign a rule to policy profile 5 that will forward UDP
frames from source port 45:
G3(su)->set policy rule 5 udpportsource 45 forward
cos cos Specifies that this rule will classify to a Class ‐ of ‐ Service ID. Valid values
are 0 ‐ 4095 . A value of ‐ 1 indicates that no CoS forwarding behavior
modification is desired. (Not supported on B3, C3, and G3.)
drop | forward Specifies that packets within this classification will be dropped or
forwarded.
Table 8-3 Valid Values for Policy Classification Rules
Classification Rule Parameter data value mask bits
ether Type field in Ethernet II packet:
1536 - 65535 or 0x600 - 0xFFFF
1 - 16
ipproto Protocol field in IP packet:
0 - 255 or 0 - 0xFF
1 - 8
Destination or Source IP Address:
ipdestsocket
ipsourcesocket IP Address in dotted decimal
format:
000.000.000.000 and
(Optional) post-fixed port: 0 -
65535
1 - 48
iptos Type of Service field in IP packet:
0 - 252 or 0 - 0xFC
1 - 8
Destination or Source MAC:
macdest
macsource MAC Address: 00-00-00-00-00-
00
1 - 48
Destination or Source TCP port:
tcpdestport
tcpsourceport TCP Port Number:
0 - 65535 or 0 - 0xFFFF
1 - 16
Destination or Source UDP port:
udpsourceport
udpdestport UDP Port Number:
0 - 65535 or 0 - 0xFFFF
1 - 16