Enterasys 6E2 Series, Руководство пользователя

Страница: 340 / 436

Built-in Commands
12-4 Network Tools Screens
12.2 BUILT-IN COMMANDS
The built-in commands listed in this section activate functions on the LM managed device or
devices being accessed through Network Tools.
command
Description:
Briefly describes the command and its uses.
Syntax:
Shows the required command format. It indicates where arguments, if any,
must be specified.
Options:
Lists any additional fields in the appropriate format that may be added to the
command.
Example:
Shows an example of the command.
alias
Description:
Enables, disables and configures alias snooping on a per-port basis.
Syntax:
alias [enable | disable | status] [ALL | port # | port range, i.e., 1-5]
alias [stats]
alias [clear_stats]
alias [fwd_list]
alias [fwd_set] [rate | burst] [value]
Options:
enable – Enables alias snooping on specific port or port range.
disable – Disables alias snooping on specified ports or port range
status – Displays the current alias snooping state (enabled or disabled) on a
port or port range.
stats – Displays current alias snooping state statistics.
clear_stats – Clears all alias snooping statistics.
fwd_list – Lists current configuration settings including max frame size, max
host queue, max PPS, and max burst.
fwd_set – Allows setting of max PPS and/or max burst configuration settings.