Enterasys 6E2 Series Скачать руководство пользователя

Страница: 249 / 436

VLAN Classification Configuration Screen

802.1Q VLAN Configuration Menu Screens

8-21

8.7.2

Configuring the VLAN Ports

To configure a VLAN port, proceed as follows:

1. Use the arrow keys to highlight the PVID field.

2. Type the PVID number to be assigned to the port.

3. Use the arrow keys to highlight the Port Mode field.

4. Press the SPACE bar to select appropriate Port Mode: HYBRID, 1Q TRUNK, or 1D TRUNK.

The default is HYBRID.

5. Use the arrow keys to highlight the port’s Acceptable Frame Types field.

6. Press the SPACE bar to toggle the field to the correct setting: ADMIT ALL FRAMES or

ADMIT TAGGED FRAMES ONLY.

7. Use the arrow keys to highlight the port’s Ingress Filtering field.

8. Press the SPACE bar to toggle the field to the correct setting: ENABLED or DISABLED. This

will either enable or disable the filtering set in the Acceptable Frame Types field in step 5.

9. Use the arrow keys to highlight the port’s GVRP Status field.

10.Press the SPACE bar to toggle the field to the correct setting: ENABLED or DISABLED.

11.To configure more than one port, repeat

step 1

through

step 10

. Then go to

step 12

to save your

settings.

12.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

13.Press ENTER. The message “SAVED OK” displays and all settings are saved.

8.8

VLAN CLASSIFICATION CONFIGURATION SCREEN

When to Use

To perform the following:

•

Display the VLAN ID (VID), Protocol Classification, and Description of each classification of
the current entries.

NOTE: In the following steps, you only need to step to the fields that you are going to
change.

Содержание 6E2 Series





















































































































































































































































































































































































































































Результаты поиска

Содержание 6E2 Series

Отзывы:

Похожие инструкции для 6E2 Series

Бренды по названию

Популярные бренды

Enterasys 6E2 Series, Руководство пользователя

Результаты поиска

Содержание 6E2 Series

Отзывы:

Похожие инструкции для 6E2 Series

Бренды по названию

Популярные бренды