UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
Enstrom TH-28/480 Series Maintenance Manual Supplement 8
G1000H Integrated Flight Deck System
Rev. 1, Jan 25/18
Page
5-5
F. If necessary, the audio output may be adjusted as desired.
(1) Remove the three screws that secure the rear plate (the third screw may be
under a tamper seal) and the three screws that secure the dust cover.
(2) Access the audio level adjustment by peeling back the foil tab marked “Audio
Level” through a hole in one of the inner covers.
G. Install the cover to the airframe with eight AN525 screws.
Figure 34. KN 63 Installation and Removal
Visit www.enstromhelicopter.com for instructions to order an original manual and to register for email notification of updates.
