4-4
ENSTROM 280FX OPERATOR’S MANUAL
FAA Approved: Mar 12/19
Rev. 12
Report No. 28-AC-020
Dec 3/18
NOTE
An Aircraft Radio Station License may not be
required for the aircraft. Refer to FCC WT Docket
No. 96-82 for more information.
d.
280FX
Operator’s
Manual.
e. Weight and balance forms (Figures 6-7 through 6-9)
for the helicopter to be flown. The serial number of
the helicopter to be flown should appear on these
forms.
NOTE
The above items are to be carried in U.S.
registered
helicopter at all times. Owners and
operators of exported helicopters should check
with their own National Aviation Authority (NAA)
to determine documents required.
3. Master switch – ON.
4. Fuel quantity – check.
5. Lights – ON then OFF after check. Check landing, anti-
collision, position, and interior lights for condition and
security.
6. Annunciator panel – press to test – all lights should be
on when button (TEST) is pushed.
7. Master switch – OFF.
8. Ignition switch – OFF.
9. All other switches – OFF.
10. Fuel valve – ON.
11. Right side flight controls – check security if installed.
Check if properly stowed if removed.
12. Pedals – adjust as required.
13. Fire extinguisher – check for charge, condition, and
security.
This electronic document is not linked to a subscription for revision control or distribution. Refer to theTechnical
Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
level of the 280FX Rotorcraft Flight Manual.
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
