53
confirmed when control commands are sent)
•
The system sends no alarm messages
•
The number is confirmed automatically, when one’s own number is added to the user catalogue
When the user catalogue contains at least one confirmed number
•
Users can be added or deleted only from numbers in the user catalogue
•
The system can only be controlled from numbers in the user catalogue
•
Alarm messages are only sent to confirmed numbers
Adding and confirming a number:
Two parameters are given; the catalogue position and telephone number. This saves the number in the
given position. The catalogue has five positions (1-5) for numbers. Each new number must be confirmed
by sending a message to the system.
E.g. the user adds the telephone number 012 3456789 to user catalogue position 1. The number is Finnish
and the country code is +358 »
PHONE 1 +358123456789
. The user confirms the added number using
e.g. the
STATUS
command.
Replacing and confirming a number:
Two parameters are given, the catalogue position and telephone number. When a number is added to a
catalogue position which is already occupied, the new number replaces the old one. Each new number
must be confirmed by sending a message to the device.
E.g. the user replaces the number in user catalogue position 1 with a new telephone number 0129876543.
The user's number is Finnish and the country code is +358 »
PHONE 1 +358129876543.
The user confirms
the added number using e.g. the
STATUS
command
Deleting a number:
The user catalogue position containing the number to be deleted is provided. E.g. the user deletes the
number from user catalogue position 1 »
PHONE 1
Printing the user catalogue:
The command
PHONE
instructs the system to reply with a list of all telephone numbers and their posi-
tions in the user catalogue
ALARM [INPUT NUMBER] [D/E]
This command activates or deactivates alarm inputs.
Input numbering:
Enable / disable the alarm:
1 = General alarm
D = Disable the alarm
2 = Humidity alarm
E = Enable the alarm
3 = Burglar alarm, presence detector
4 = Fire alarm
5 = Power failure alarm
6 = Burglar alarm, boundary protection
7 = Inside temperature alarm
8 = Outside temperature alarm
E.g. The user activates the fire alarm »
ALARM 4 E
ALARM 4 E
Alarm 4 enabled
