manualshive.com logo in svg

enraf Ensite Pro, Инструкция по эксплуатации

Поделиться
Скачать
enraf Ensite Pro Скачать руководство пользователя страница 9

Configuration procedure

Instruction manual Ensite Pro Configuration Tool

Page 9

Retrieving configuration data of gauges

As first step the gauges should be configured correctly. This can best
be done by means of the DOS program ENSITE. 
With ENSITE the so called .LOG files can be created. These .LOG
files contain all the programmable settings of relevant gauge.

If no gauges are installed yet, it is also possible to prepare these in
ENSITE. They can then later be down loaded into the gauge.

Configuration of the Tanks

Also the creation of the tanks is a straightforward process.
At the creation of a new tank, the user is always prompted for a name.
Preferably use the same name as the name already in use on site.
Once the tank has been created, the user has to enter specific tank
details, like Tank shape, Roof details, etc.

Tank strapping tables or capacity tables can be linked via an external
file. This file needs to be  conform the TCT specification as specified
in this manual. The format is a simple ASCII, comma delimited format.

The straps can either be manually entered, or be calculated out of a
formula, depending on what information is available. The strapping file
can contain a maximum of 2000 straps. The total capacity of the CIU+
is 20000 straps.

The data can best be prepared by means of a spreadsheet program
like Excel or Lotus 123. Users already using Entis+, can contact the
factory for a TCT extraction program.
This program extracts the strapping table out of the internal Entis+
database, and converts it into an Ensite Pro compatible format.
Once all the tanks are created in the database, the user can either
start with the configuration of the CIU Primes or the CIU Pluses.

Configuration of CIU Prime’s

In the 880 series CIU Prime, the following parts can be configured:

•

HostPort 1

•

HostPort 2

•

Hot standby (if applicable)

•

Field ports

•

The hot  stanby settings are required if redundant CIU Primes
are installed.

The Field ports settings depend on the type of interface card installed
in the CIU Prime.

Содержание Ensite Pro

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды