Ensemble Commissioning: Installer Toolkit Communications
© 2020 Enphase Energy Inc. All rights reserved.
July 24, 2020
___________Installer Initials: All steps complete on this page
7
shown below the button, then the upgrade has failed and you must tap
Upgrade Firmware
again.
F.10. Tap
Start Provisioning Devices
at the bottom of the
Envoy Connectivity
screen.
G. Installer Toolkit step 5,
Provisioning Devices
:
G.1. You must be Ensemble training certified to provision Ensemble devices. If you are
not, you will be asked to select a certified user from your company.
G.2. Ensure that the Ensemble communications kit or COMMS-KIT-01 is plugged into one
of the Envoy USB ports. Device provisioning will not be successful if the COMMS-
KIT-01 is missing or not plugged in.
G.3. Installer Toolkit will begin provisioning all devices, and several steps will occur (taking
approx. 3 to 6 minutes):
