Enovation Controls Murphy PowerView PV380-R2, Руководство по эксплуатации

Страница: 15 / 30

Section 78 00-02-0997 (web only)
2019-10-07 - 13 -
Regen
Follow these steps to initiate a Regen:
1. Press to display the Menu.
2. Press to Regen. Press to enter.
3. Press once more on Request DPF Regen.
4.
In answer to the question “Request Diesel Particulate Filter Regen?” use Key 3 for Yes
and Key 5 for No.
Follow these steps to change the Regen mode:
1. Press to display the Menu.
2. Press to Regen. Press to enter.
3. If the engine ECU has inhibited a regeneration, the Regen Mode will display the current
mode of the engine regeneration as Inhibit.
4. The AUTO REGEN button will be available to switch the engine to automatically
regenerate.
5. If the engine ECU is currently on AUTO regeneration, the Regen Mode will display the
current mode of the engine regeneration as Auto.
6. The INHIBIT REGEN button will be available to inhibit a regeneration if the engine is in
Active Regen.
7. The regen mode will display N/A when ECU does not transmit a regen mode (SPN
3703)
8. Press to return to the Menu.