Enovation Controls Murphy PowerView PV380-R2, Руководство по эксплуатации

Страница: 11 / 30

Section 78 00-02-0997 (web only)
2019-10-07 - 9 -
2. Tachometer Area: Displays the engine speed gauge with an option to choose a 3000,
4000 or 6000 RPM dial (See Display Setup on page 18 for more information).
3. Parameter Area: The following parameters are the electronic engine defaults until other
parameters are selected from the menu. Only the bottom four parameters on the second
screen can be changed:

Engine Oil Pressure

Engine Temperature

Engine Hours

Battery Voltage Fuel Level

DEF Level (Tier 4 only) / Target Speed (when SCR is disabled)
.
NOTE : Target Speed gauge appears for 5 seconds when the user throttles the engine
(see arrow above)
4. Button Selection Display: The button functions can change depending on the screen
displayed.
Adjusting Menu Selections
NOTE : Once parameters are changed, back out of all menus and initiate a power
cycle for changes to take effect.
User Settings
Brightness and Contrast
Follow these steps to adjust the Brightness and Contrast:
1. Press to display the Menu.
2. Arrow to
USER SETTINGS.
Press and arrow to the desired selection.
3. Press and to adjust the selection.
4. Press to save and exit the menu.