Enlogic EN1201, Инструкция по установке и эксплуатации, Страница: 31 / 56

The Critical Component
EN Series User Manual
31
• AuthPriv: Authentication and privacy.
• Either select “Use Password as Authentication Phrase” or enter a new unique password to be
used for authentication and then enter the new pass phrase again for confimration in the Confirm
Authenticatinon Pass Phrase field.
• Either select “Use Authentication Pass Phrase as Privacy Pass Phrase,” to use the user’s authentication
pass phrase as their privacy pass phrase, or enter a new pass phrase for privacy in the fields provided:
Privacy Pass Phrase, and Confirm Privacy Pass Phrase.
Configuring SNMP Traps
The EN Series PDU keeps an internal log of all events. These events can be used to send SNMP traps to a third party manager. To
setup the PDU to send SNMP traps.
Configuring SNMP Trap Settings
1. Go to Device Configuration > Network Services > SNMP
2. Click the Traps tab in the SNMP Settings dialog box.
3. Select the enable the System SNMP Trap Event Rule checkbox.
4. Enter an IP address or host name, a port, and a community name in the fields provided.
• IP Address is the address to which traps are sent by the SNMP system agent.
• Port is the communication port number.
• Community is the group representing the PDU and SNMP management stations.
5. Select OK to save and exit.
Note: For SNMP Trap Settings to take effect, you must set the Rule Settings as follows: