Enlogic EN1201, Инструкция по установке и эксплуатации, Страница: 11 / 56

The Critical Component
EN Series User Manual
11
Menu, Reset, and Unit Status Button
These are all on the front of the PDU underneath the OLED Display. The are as follows:
1: Reset Button
2: Unit Status LED
3: Menu Buttons
1
2
3
Unit Status LED
LED State Description
Solid Green Normal Operation
Solid Red Critical Alarm
Solid Orange Warning Alarm
Blinking Orange Disconnected from network
Green, Red, Orange blinking Upgrading
Off In USB Mode
Menu Buttons
The Menu Buttons allow a user to navigate through the OLED display. They are:
• Menu–Use this button as a “back” button to go to the previous menu screen.
• Scroll–Use this button to scroll through menu options.
• Select–Use this button to choose an option from a list.
Reset Buttons
The Reset Button is located in the small, recessed hole above the Menu buttons to prevent accidental reset.
By pressing a small pin into the Reset Button hole for 8 seconds, the PDU software with cycle through a soft
reboot without any loss of power to outlets.
Circuit Breakers
EN Series PDUs that are rated over 20A (North American) or 16A (international) have branch circuit breakers.
These circuit breakers trip when the current flowing through the breaker exceeds its rating. When a circuit breaker
trips, power is shut off to any outlets connected to it.
Enlogic PDU circuit breakers sit underneath a protective panel to prevent accidentally tripping the circuits. If a
circuit breaker is tripped, you can easily manually reset to the ON position for normal operation by pressing the
ON button(s), as shown below: