Enlogic EN1201, Инструкция по установке и эксплуатации, Страница: 18 / 56

www.enlogic.com 18
Change Password
1. Go to User Administration>Change Password.
2. The Change User Password window opens.
3. Enter the old password and then new password twice to confirm. By default, passwords must be between 8 and
32 characters.
Users
Add: To add a user, go to User Administration>Users,
1. Select New to create a new user profile.
2. Use the Settings tab to enter the following information:
• User Name (required)
• Full Name (required)
• Password(required)
Note: Set password requirements in the Device Configuration menu. By default, passwords must
be 8-32 characters in length, and to have at least one numeric character, and at least one special
character.
• Confirm Password
• Telephone Number (optional)
• Email Address (optional)
This will be used to send emails for event actions. If not entered, event
emails will NOT be received.
3. Use the SNMPv3 tab to enable and configure SNMPv3 access and enter the desired settings:
• Select “Enable SNMPv3 access.” (Leave this box blank to restrict SNMP access).
• Choose a Security Level:
• NoAuthNoPriv: No authentication and no privacy.
• AuthNoPriv: Authentication and no privacy.
• AuthPriv: Authentication and privacy. This is the default.
• Set the pass phrases to be used for authentication and privacy.
• If you select “Use Password as Authentication Phrase” the authentication pass phrase is
identical to the user’s password.
• (optional) You may choose instead enter a new pass phrase for authentication in the fields
provided: Authentication Pass Phrase:, and Confirm Authentication Pass Phrase
• If you select “Use Authentication Pass Phrase as Privacy Pass Phrase” then the user’s
authentication pass phrase serves as their privacy pass phrase.
• (optional) You may choose instead to enter a new pass phrase for privacy in the fields provided:
Privacy Pass Phrase, and Confirm Privacy Pass Phrase.
4. Use the Roles tab to set admin or user privileges.
5. Use the Preferences tab to set units of measurement.
6. Select OK to save the new user profile.
Modify: To edit a user profile, go to User Administration>Users,
1. Select the user name.
2. Select Edit.
3. Make changes to the user profile. Select OK.
Delete: To delete a user profile, go to User Administration>Users,
1. Select the user name.
Note: To make multiple selections, press Shift+click to highlight multiple profiles.
2. Select Delete.
3. Select Yes to confirm the deletion. Select No to cancel.