manualshive.com logo in svg

Enlogic EN1201, Инструкция по установке и эксплуатации, Страница: 26 / 56

Поделиться
Скачать
Enlogic EN1201 Скачать руководство пользователя страница 26

www.enlogic.com   

26

• 

Idle Time: The length of time (in 00h:00m:00s) that a user has been idle.

3.  To disconnect a user, select the user name and press the Disconnect button. Select Yes at the confirmation prompt 

to disconnect the user. Select No to keep the user logged in. 

Note: Only users with Admin privileges can disconnect 

other users.

4.  Select Close.

Diagnostics

Download Diagnostic Information

To Download PDU DIagnostic information, such as system information, outlet power status, network 

information, etc:

1.  Go to System Administration > Diagnostics > Download Diagnostic Information. 
2.  Click the Download Diagnostic Information button, shown below. 

 

3.  A file will open in a new window. (Filename: http://<

ip address

>/info/diaginfo.txt)

PDU Configuration File

To upload or download the Configuration file:

1.  Go to System Administration > PDU Configuration File. 
2.  Download the current configuration file as a .ini file. 
3.  Select the new .ini file to upload. Make sure it is the same SKU number as the current model.  

Device Information

Go to System Administration > Device Information to view specific information about the PDU, such as:
•  PDU Information: SKU, Serial Number, Rating, Function Type, IP Addresses, Firmware Version
•  Outlets: Outlet Number, Operating Voltage, Rated Current
•  Circuit Breakers: CB Labels, Type, Rated Current, Protected Outlets

Network Card Reset

To reboot the Network Management Card (NMC) from the Web UI, a user must have ‘ network card reset’ 

privileges:

1.  Go to System Administration > Network Card Reset. 
2.  At the Reset Device dialog box, select OK.
3.  A message and countdown dialog box show the remaining time until reset is complete.
4.  When the reset is complete, the Login page opens. Proceed with login as required. 

Help

Selecting the Help button from the Web Interface will redirect to www.enlogic.com. From here, go to www.enlogic.
com/manual to access the latest version of the User Manual. For additional information, select the Contact Us tab 
and contact your regional support team. 

Navigating the PDU Explorer 

The PDU Explorer to the left of the screen displays a menu tree that details the Enlogic device being accessed and components 
on or connected to this PDU, such as inlets, outlets, and environmental sensors. 

Содержание EN1201

























































Отзывы:

Нет отзывов