Engl SOVEREIGN 100, Руководство оператора

Страница: 24 / 36

Programming sounds (settings, actually) to MIDI presets:
The programming process in steps:
Copying:
For reasons of convenience and handling ease, we made programming sounds to MIDI
presets a piece of cake. Because this amp offers many programmable switching
functions, is indeed a handy tool. It lets you copy the settings of one MIDI preset
to another. You'll come to appreciate its utility when you begin programming your
own presets. Dumping a stored setup from one MIDI preset to another, and editing
and storing changes in the target preset, is so much faster and more convenient than
programming from scratch every time. MIDI preset 1 is called up automatically when
you switch the amp on. This ensures that when you power up, the settings for
programmable sound-shaping functions are immediately enabled in the configuration
stored in the most recent programming session - without having to first connect a MIDI
foot board.
1. Select the desired MIDI program (also called a preset or patch) using a MIDI foot
board connected to the amp's .
2. Set all programmable features as required, configuring , ,
, , and so forth as you please. All programmable functions are
designated as such in their descriptions herein.
3. The Status LED flashes to indicate you have edited one or several settings.
4. Press and hold the Write/Copy button (15) for about one second until the Status
LED extinguishes, and then flashes three times in rapid succession. The current settings
of all programmable functions are now stored in the selected MIDI patch.
1. Select the desired MIDI preset using a MIDI foot board connected to the amp's MIDI
In port. This is the preset that you want to copy, which is why in geek-speak it is called
the "source."
2. Press the Copy/Write button briefly. It is essential that during this routine you do not
change the settings of programmable functions in the selected source preset. That
Status LED lights up continuously to indicate that Copy is activated.
3. Select the target preset via the MIDI foot board; you have approx. 30 seconds to do
this. (The amp automatically quits Copy mode 30 seconds after it is activated.)
4. Press and hold the Write/Copy button (15) until the Status LED extinguishes, and
then flashes three times in rapid succession. The current settings of all programmable
functions stored in the source MIDI patch (that's the preset you selected first when you
activated ) have now been dumped to the newly selected target preset.
Keep the amp safe from hard knocks and shocks. Tubes are fragile and tend to suffer
when exposed to mechanical stress!
Let the amp cool down before you transport it. Ten 10 minutes or so will do to spare
the tubes.
Tubes take some 20 seconds to warm up after you switch the power on, and about
Copy
MIDI In
Lead I Gain Lo/Hi Master A,
Reverb Active FX Loop II
Copy
Handling and Care:
24