EnGenius FreeStyl SIP Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 77

background image

~9~

IMPORTANT NOTE:
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set for th for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

Industry Canada Statement:

This  device complies  with  RSS-210 of  the  Industry  Canada  Rules.  Operation is
subject to the following two conditions:
(1)  This  device may  not  cause  harmful  interference, and  (2)  this  device  must
accept  any  interference  received,  including  interference  that  may  cause
undesired operation.

IMPORTANT NOTE:
Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits  set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum  distance 20cm between the radiator & your body.

This  device has been designed to  operate with  an antenna  having  a maximum
gain of 2 dBi. Antenna having a higher gain is strictly prohibited per regulations
of Industry Canada.  The required antenna impedance is 50 ohms.

Portable Handset

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits  for a Class
B digital  device, pursuant to Part 15 of the FCC Rules. These limits  are designed
to provide reasonable protection against  harmful interference in a residential
installation.  This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.  However, there is no
guarantee that  interference will not occur in a particular installation.  If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.

«
...
7
8
9
10
11
...
»

Содержание FreeStyl SIP














































































Отзывы:

Нет отзывов

Похожие инструкции для FreeStyl SIP

Бренд: 3Com Страницы: 118

Бренд: Jabra Страницы: 2

Бренд: T-Comfort Страницы: 48

Бренд: Talkswitch Страницы: 334

Бренд: Guardian Страницы: 16

Бренд: TDS Страницы: 8

Бренд: Alcatel Страницы: 2

DECT 1730 Series

Бренд: Uniden Страницы: 32

T42S-Skype for Business

Бренд: Yealink Страницы: 8

Бренд: HIKOKI Страницы: 24

Бренд: FMUser Страницы: 16

Бренд: Grandstream Networks Страницы: 7

Бренд: Alcatel Страницы: 64

Бренд: AEI Страницы: 6

Бренд: GE Страницы: 9

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды