EnGenius FreeStyl SIP Скачать руководство пользователя страница 19

Страница: 19 / 77

~19~

Dial from display.

d. During the stand-by mode, you can enter the phone book by pressing

the scrolling key.

e. Phone Book transfer via air

Transfer a specific Phone Book to one handset or all registered
handsets

ii.

Transfer all Phone Books to one handset or all registered handsets

15. Key Tone

Four-level Key Tone volume selections (Off/Low/Medium/High).

b. Four Key Tone type selections.

16. Call Timers

Displays call time duration for current call, during and immediately after
the call.

17. Programmable Feature Call

Allows user to pre-program the most frequently used Feature code s into
the FreeStyl SIP, which is adjunct to the PBX system.

b. Up to 10-entries can be saved.

c. Once the feature code has been programmed, you can quickly perform

those functions during the call by pressing the

OPTION

soft key.

18. Menu Display

To avoid mis-

setup in the “Call Settings”(

-4

), “Phone Settings”

(

-5), and

“Base Settings” (

-6), these settings can be hidden.

b. The Handset password is required before entering Menu Display (

8), the default handset password is “0000

”

When disabling the settings, they will no longer be displayed unless
enabled by entering Menu Display again.

19. PA On/Off

Enable or disable the Broadcast function.

b. When PA is Off, the handset cannot receive Broadcast from the base

station or other registered handsets; but it can broadcast to other
registered handsets.

20. Group Setting

Allows the handset to subscribe to one or several groups.

Re: Up to 7 groups (1~7) can be subscribed.

Содержание FreeStyl SIP














































































Результаты поиска

Содержание FreeStyl SIP

Отзывы:

EnGenius FreeStyl SIP, Руководство пользователя, Страница: 19 / 77

Результаты поиска

Содержание FreeStyl SIP

Отзывы: