EnGenius FreeStyl SIP, Руководство пользователя

Страница: 40 / 77

~40~
If HS 11 does not answer to the transfer, After 8 rings, it
will transfer back to the transferee HS 10 with a unique
transfer ring tone.
Indirect Transfer (2-way Announced Transfer)
If you want to talk to the destination handset before the call is
transferred, you can follow the below method:
00:00:15
Volume: 3
11
MUTE OPTION
L1
1. During the call, press
key, then enter the destination
handset ID.
2.
Press the of the destination handset to answer the
intercom call, you can now talk to the destination handset.
After talking, press to end the intercom call, and then
the destination handset is able to pick up the incoming call
automatically.
Enter Ext #:
##
11
CANCEL
L1
After the call is transferred to the destination handset, the
original handset will go back to standby mode automatically.
PS: If HS 11 Decides to take the call, Transferee HS 10 will
need to press key for the call to transfer to HS 11.
HS 11 Decides NOT to take the call, requested HS 11 will
need to press Key to end 2-way and deny transfer,
call will go back to HS 10.
Notes: If the destination handset does not answer after paging it or
transferring timeout, the call is routed back to the originating handset.
➢
Transfer to PBX Extension
While a telephone call is in progress, you want to transfer it to another extension
(not an EnGenius handset). This kind of operation is similar to use ATA device.
Call Transfer