EnGenius FreeStyl SIP Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 77

background image

~72~

Base Station

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits  for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits  are designed to
provide reasonable protection against harmful interference in a residential
installation.  This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.  However, there is no guarantee that
interference will not occur in a particular installation.  If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to c orrect the
interference by one of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

IMPORTANT NOTE:
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

This transmitter must  not be co-located or operating in conjunction with any other
antenna or transmitter.

15.214 (d) Cordless telephones shall incorporate circuitry which makes use of a
digital security code to provide protection against  unintentional access to the public
switched telephone network by the base unit and unintentional ringing by the
handset. These functions shall operate such that  each access of the telephone
network or ringing of the handset is preceded by the transmission  of a code word.

«
...
70
71
72
73
74
...
»

Содержание FreeStyl SIP














































































Отзывы:

Нет отзывов

Похожие инструкции для FreeStyl SIP

Бренд: Karel Страницы: 13

Hi-Phone Maestro

Бренд: way2call Страницы: 2

Бренд: J-3 International Holding Co. Страницы: 5

Бренд: Topcom Страницы: 72

Бренд: VTech Страницы: 46

Бренд: VoipTel Страницы: 6

Бренд: BT Страницы: 51

Бренд: VTech Страницы: 68

Бренд: AT&T Страницы: 69

Бренд: GE Страницы: 72

Бренд: GE Страницы: 36

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

Бренд: GE Страницы: 76

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

Бренд: GE Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды