EnGenius FreeStyl SIP Скачать руководство пользователя страница 23

Страница: 23 / 77

~23~

Base Features

Basic Base Station Features

1. Antenna

a. The antenna port has a

reversed thread connector

; to remove antenna or

cable, turn clockwise; to install, turn counterclockwise. Improper
installation may damage the connector.

b. When using an outdoor antenna, locate the antenna (not the base station

itself) as high as possible for a clear transmission path.

2. LED

a. Power (blue color): indicates base station has power.

b. In-Use (white color): indicates an active telephone line.

3. RESET Button

a. Restores base station to factory settings

b. Reset button is intended to prevent accidental system reset.

c. All handsets (including administrator) need to be re -registered after a base

station reset.

4. Page Button (Locate handset)

To find a misplaced handset; press “PAGE”

and all registered handsets will beep

for 30 seconds.

Press “PAGE” again or any key on handset to stop.

Re:

“

PAGE

”

is for locating handset only, not able to make intercom with

handset.

5. Registration Button (PAGE)

Enters registration mode along with handset, assigns handset ID (1 0-19).

6. LAN Jack

Standard RJ-45 connector to plug in the Ethernet(LAN) line

7. DC In: to plug in the power adaptor

Содержание FreeStyl SIP














































































Результаты поиска

Содержание FreeStyl SIP

Отзывы:

EnGenius FreeStyl SIP, Руководство пользователя, Страница: 23 / 77

Результаты поиска

Содержание FreeStyl SIP

Отзывы: