EnGenius FreeStyl SIP Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 77

background image

~7~

16.

Do not use the product to report a gas leak while in the vicinity of the leak.

17.

Do not install the base station  or the handset charger near microwave ovens,
radios, TV sets, speakers, or other electrical equipment.  These appliances may
cause interference to the product or experience interference  from the product.

18.

Unplug the base station or the charger adaptor from the power outlet and refer
to an authorized service center under the following conditions:

a.

If liquid has been spilled into the product.

b.

When the power supply cord or plug is damaged or frayed.

c.

If the product has been exposed to rain or water.

d.

If the product does not operate normally by following the operating
instructions.

e.

If the product has been dropped or housing has been damaged.

f.

If the product shows a distinct change in performance.

Battery Safety Instructions

1.

Use only manufacturer approved Li-Ion rechargeable batteries and charger. Do
not use other types of rechargeable batteries or non-rechargeable batteries.
The batteries could short-circuit, and the battery enclosure may be damaged
causing a hazardous condition.

2.

Follow the charging instruction in this manual and instruction labels and
markings in the handset and charger compartments.

3.

Battery must be recycled or disposed of properly. Do not dispose the battery in
a fire. The cells may explode.

4.

Do not dispose of the battery in municipal waste. Check with local codes for
disposal instructions.

5.

Exercise care in handling the batteries so you do not short-circuit the battery
with conductive materials such as rings, bracelets, keys, pocketknives, and/or
coins. The battery or conductive material may overheat and cause burn s or
fire.

6.

Do not expose batteries to rain or water.

7.

Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause injury to eyes or skin. The electrolyte may be toxic if swallowed.

8.

During charging, the battery heats up. This is normal and is not dangerous.

«
...
5
6
7
8
9
...
»

Содержание FreeStyl SIP














































































Отзывы:

Нет отзывов

Похожие инструкции для FreeStyl SIP

Бренд: Olympia Страницы: 28

Бренд: Aastra Страницы: 91

Бренд: Aastra Страницы: 20

Бренд: Octopus Страницы: 128

Бренд: JRC Страницы: 110

Бренд: Uniden Страницы: 48

Бренд: Clarke Страницы: 16

Бренд: Sagem Страницы: 64

Бренд: Southwestern Bell Страницы: 24

Бренд: MagicBox Страницы: 44

Бренд: Gigaset Страницы: 28

Бренд: Panacom Страницы: 16

Бренд: Topcom Страницы: 296

Бренд: PalmMicro Страницы: 37

Бренд: Serene Страницы: 30

Бренд: GAI-Tronics Страницы: 16

Бренд: Makita Страницы: 32

Бренд: Beko Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды