Eng3 4650-00, Руководство пользователя, Страница: 22 / 44

16
eng
3
1) Setting Preferences
Adjust the volume of the tone that sounds when you touch the screen by touching the + or
– symbol.
Repeatedly touching the
– symbol will reduce the volume until the sound is turned off completely.
Adjust the brightness of the screen by touching the appro or
– symbols. It is not possible to
turn the screen off completely.
2) Setting Operation Mode
The Owner Card administrative screen allows you to set the operation mode of the Exo or Pro device.
It can be operated in four different ways: timer mode, infinity mode, User Card timer mode, and User
Card session mode. These options are described below.
1. Timer mode
– does not require a User Card, the device
operates as described in Section 7, Operating in Standard
Mode. To select this mode touch the top white button so that a
dot appears, as shown to the right.
2. Infinity mode - does not require a User Card and the device
remains on, as indicated by the infinity symbol. Figure 8.2
shows the start screen if the device is configured for infinity
mode. Figure 8.3 shows the screen displayed during a session
in infinity mode. The timer counts up instead of down in infinity
mode. Touch the middle button to select infinity mode.
Figure 8.2: Infinity mode start screen Figure 8.3: Infinity mode session screen
3. User Card timer mode
– requires a User Card and allows the
user to enter the session time. Select the SmartCard option by
touching the bottom button.
4. User Card session mode - requires a User Card and has a
predetermined session time. Select both timer mode and User
Card session mode to configure the device in User Card