Eng3 4650-00, Руководство пользователя, Страница: 12 / 44

6
eng
3
2.
Unwrap the
NanoVi™ device carefully and keep the original packing materials for future trans-
portation of the device.
3.
Place the
NanoVi™ device on a flat, clean surface, such as a table.
4.
Unpack all accessories and place them beside the device.
5.2
Set Up
There are no special tools or materials required for setup other than distilled, purified or osmotic water
to clean and fill the glass container. The user who receives treatment is the PATIENT and when they
also operate the device they are considered the OPERATOR and SERVICE PERSONEL.
WARNING: Do not connect or attach any item that is not specified as an attachment by
the manufacturer.
WARNING: This product is not meant to be used in temperatures below 59
°
F (15
°
C) or
temperatures exceeding 97
°
F (36
°
C).
Follow these steps to set up your device:
1. Use indoors, away from wet/splash/drips, between 59
°F (15°C) and 97°F (36°C).
2.
Place the NanoVi™ device on a clean, solid surface.
3.
Rinse glass container using distilled, purified or osmotic water.
4.
Fill the container with distilled, purified or osmotic water. Make sure the water is between the
maximum and minimum filling levels on the container.
Figure 5.1: Correct water levels Figure 5.2: Incorrect water levels
!
!