Eng3 4650-00, Руководство пользователя, Страница: 19 / 44

eng
3
13
6.8
Session Running
When a session is started you will hear a quiet humming sound, see bubbles in the glass container,
and, if the lights are turned on, see the illumination of the water in the glass container.
If the water is bubbling, the device is operating correctly. If it is not bubbling, check to make sure the
humidifier is correctly seated in the back of the device and that the glass container is firmly screwed
into the glass container holder. Correctly seating the humidifier also minimizes the noise.
7
Operating in Standard Mode
All three
NanoVi™ devices can be operated in standard mode. Once the device is turned on, a splash
screen appears. A self-test runs for 10 seconds with progress shown by the bar at the bottom of the
screen. (Figure 7.1)
Figure 7.1: Initial splash screen
Upon completion of the self-test, an input screen appears allowing you to enter the amount of time for
the session (Figure 7.2). Enter the desired session time by touching the appropriate numbers on the
touch screen. Time is entered in minutes. The minutes entered shows in the session time indicator in
the centre of the screen. Touching the “C” clears a number that has been entered, allowing you to
change your input.
The “M” on the input screen lets you capture the amount of time in the memory of the device as the
default session time. The amount of time most recently captured in memory will be displayed instead
of “0 min” in the time indicator for all future sessions. The default time in memory can be reset to zero
or to a different default time at any point, while the input screen is displayed.
Once the correct amount of time is entered, touch the blue start button to begin the session.