
eng
3
7
WARNING: Fill water at least to the minimum filling level as indicated on the container.
Adequate air humidification depends on the amount of available water. (Figure 5.1)
WARNING: Do not fill the container with more water than the maximum filling level indica-
tes, as water drops or water may enter the tube system or device. (Figure 5.2)
5.
Hand tighten glass container into the glass container holder.
6.
Insert humidifier into the fitting on the top of the device, at the back. The connecting tubes
protruding from the humidifier slide down into the device as shown in Figure 5.3. There will be
a small gap between the humidifier and the device when there is a proper connection.
Figure 5.3: Inserting humidifier into device
WARNING: Only insert the humidifier with the glass container facing the front of the
device. The glass container must be aligned with the circular metal component on top of
the device. Inserting the humidifier in any other position, could injure the PATIENT or
damage the device.
WARNING: Do not tip the container when inserting it into the top of the device, as water
drops or water may enter the tube system or device.
Confirm that there is only a small gap between the humidifier and the device. This ensures a
proper connection. (Figure 5.4).
!
!
!
!
Содержание 4650-00
