ENFORCER
Heavy-Duty Outdoor Access Control Keypad with Proximity Reader
8
SECO-LARM U.S.A., Inc.
Installation:
Key lock
Tamper screw
Inner back box
1.
Unlock the keylock mounted on the face of the keypad with one
of the included keys.
2.
Remove the tamper screw from the bottom of the keypad with
the included security wrench.
3.
Open the faceplate of the keypad. The hinge will allow the
faceplate to hang open during installation.
4.
Remove the 1" wiring hole cover from the back of the keypad
housing.
5.
Install the keypad using the included mounting screws and
mounting screw anchors (if necessary).
NOTE:
If attaching the keypad to a mounting plate, such as a
gooseneck stand, use the 4 mounting plate holes
located on the back of the keypad housing (see Fig. 1).
6.
Remove the inner plastic back box to access the terminals.
7.
Connect the wires to the keypad according to the wiring diagram (see "Wiring Diagram," pg. 9).
8.
Finish assembly by replacing the inner back box, closing and locking the keypad, and
replacing the tamper screw.
Fig. 1
These holes are used to
mount the keypad to a
gooseneck stand.
