ENFORCER
Heavy-Duty Outdoor Access Control Keypad with Proximity Reader
SECO-LARM U.S.A., Inc.
23
Programming Duress Codes:
Duress codes allow users to trigger a silent alarm or alert if forced to allow access to a protected
area. If one uses a duress code instead of their normal user code, outputs #1, #2, or #3 will activate
as normal, but the duress output will simultaneously activate to trigger a silent alarm or alert.
NOTES:
•
Duress codes are always valid and are not inhibited by any other operation of the keypad.
•
Duress codes cannot be the same as any other user codes
.
•
Duress codes can be used either as stand-alone codes or in conjunction with a user card,
depending on how the user codes are programmed (see “Programming User Codes and
Proximity Cards,” pgs. 20~21).
•
The duress code should be easy to remember. For instance, it can be the same as a user’s
normal user code, but with a single digit changed, as by subtracting or adding 1 to the first or last
digit of the code. For example, if the user code is 1369, a good duress code might be 2369.
When programming duress codes, use this general formula:
– Output
– Duress ID
– Duress Code
Outputs:
•
–
Output #1
•
–
Output #2
•
–
Output #3
Duress IDs:
•
to
–
Up to 50 duress codes can be programmed for output #1.
•
to
–
Up to 10 duress codes can be programmed for output #2.
•
to
–
Up to 10 duress codes can be programmed for output #3.
•
–
Delete all currently programmed duress codes.
Duress Codes:
•
A duress code can be 4 to 8 digits long and must have the same length as the master
programming code if the keypad is used in auto code entry mode (see “Programming the User
Code Entry Mode,” pgs. 28~29).
