^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 34 of 49
Picture 22: User Interface when Starting the Program
On the user interface the command sequence is edited in the command area. For this purpose
one pulls a displayed term out of one of the two with headings
Commands
or
Extensions
to one
of the starts in the big right field.
While pressing the left mouse button a desired term out of these lists is marked. Now keep the
left mouse button pressed and move the marked term to the desired location in the editing area
and it will be placed by releasing the button. For the formation of commands are approximately
250 words available in the command list.
The asterisks in the editing area serve as placeholders and are replaced by the selected
command. Commands sequences can be assembled with maximum four words as in a modular
system. As an example Picture 23 the term 'Shading' with the help of the described method
was moved to third line of command on the second place.
Picture 23: Transmission of a Term through Drag & Drop
Depending on the license are up to 40 command sequences are assigned. Please pay attention
to the setting rules when creating the commands (see page 43).
Using the right mouse button or the menu item
Edit
you can copy marked rows from the right
field via
Copy
and Insert
in to the clipboard and then paste it into another row. It is also
possible to delete marked rows
or insert one row between two rows.
. If a middle mouse
button is available, with it individual terms can be deleted.
Above the command area there is a selection box for the Keyword (see Picture 22). By means
of the slider the required Clarity can be adjusted on a scale from 0 to 7 and the Range via the
slider 'Sensitivity' from 0 to 9.
The edited file can then preferable be stored in the directory with the main program
and
reopened later
. If the command area is finished editing the SD-files can be created via
compilation tool
in the toolbar. The SD data are then in the directory
SD
in the application file.
The contents of this directory can then be copied to the delivered SD card which is then
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - [email protected]
