^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 31 of 49
ID
Function
Name
Length
Type
Flags
176 Audio Output
Stop Audio File
1 bit (b01)
[1.1] DPT_Switch
-WC---
Via this object can be stopped playing of an audio file from the SD card.
0 = No Function
1 = Stop Playing
Note:
The read value of the object is only defined if the object at least was written once.
Licenses:
Standard, Premium
ID
Function
Name
Length
Type
Flags
177 Audio Output
Speaker Volume
8 bits (i08) [5.1] DPT_Scaling
-WC---
This object defines the colume of the speaker from 0 to -31 dB (0 dB = maximum volume, -31 dB = minimum volume.
Note:
The read value of the object is only defined if the object at least was written once.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
178 Settings
Brightness „Ambiente“
8 bits (u08) [5] 5.xxx
-WC---
With the help of this object the brightness of the „Ambiente“ lighting can be adjusted. Values are from 0 % (minimum
brightness) to 100 % (maximum brightness) are possible.
Note:
The read value of the object is only defined if the object at least was written once.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
179 Settings
Brightness Ring
8 bits (u08) [5] 5.xxx
-WC---
With the help of this object the brightness of the ring light can be adjusted. Values are from 0 % (minimum brightness)
to 100 % (maximum brightness) are possible.
Note:
The read value of the object is only defined if the object at least was written once.
Licenses:
Starter, Standard, Premium
ID
Function
Name
Length
Type
Flags
180 Settings
Modulation
2 bits
[2.2]
DPT_Bool_Control
-WC---
Using this 2 bits object the light effects of the room controller can be configured. The following values are possible.
0 = Pulsation deactivated
1 = Pulsation deactivated
2 = Pulsation in the mode „Warp Core Effect“ deactivated (the brightness of the green components varies)
3 = Pulsation in the mode „Brightness“ activated (the brightness of all color components varies)
Note:
The read value of this object is only defined if the object at least was written once.
Licenses:
Premium
ID
Function
Name
Length
Type
Flags
181 Status
Controller status RHCC
16 bits
(u16)
[22.101]
DPT_StatusRHCC
R-CT--
This object represents parts of the controller status. For the most users however the more common object 17 is
interesting for the controller status.
The controller status adds the following values:
128 = Heating off
256 = Heating/Cooling
2048 = Cooling off
4096 = Dew Point
8192 = Frost Alarm
Licenses:
Starter, Standard, Premium
Communication flags according to the KNX specification with the following functions (see ETS24
manual):
•
C = Communication: bus communication possible
•
R = Read: Enables reading of a value from the communication object
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - [email protected]
