Enertex MultiSense KNX, Руководство и настройка

Страница: 26 / 49

^SynOhrMultiSenseKNX-Eng-13.odt, 2014-05-06 Page 26 of 49
ID Function Name Length Type Flags
26 Time of Day Time of Day 3 bytes
(t24) [10.1]
DPT_TimeOfDay -WCTU-
This object can set the time of day from the room controller.
Licenses: Starter, Standard, Premium
ID Function Name Length Type Flags
27
-
66 Speech
Command Speech Command 1 bit 1.xxx -WCTU-
Using these objects the speech commands are configured, which were previously defined in the program
SynOhrStudio. Via the 1 bit objects e.g. switching commands can be executed.
Note: These objects are only available if corresponding parameters „Speech Commands → Speech Command X“ are
set on Switching.
Licenses: Starter, Standard, Premium. The number varies depending on the license.
ID Function Name Length Type Flags
67
-
106 Speech
Command Speech Command 4 bits [3.7] DPT_Control_
Dimming/ [3.8]
DPT_Control_Blind
s -WCTU-
Using these objects the speech commands are configured, which were previously defined in the program
SynOhrStudio. Via the 4 bits objects e.g. dimming commands can be executed.
Note: These objects are only available, if the corresponding parameters „Speech Commands → Speech Command
X“ are set on Dimming or Blinds.
Licenses: Starter, Standard, Premium. The number of varies is depending on the license.
ID Function Name Length Type Flags
107
-
146 Speech
Command Speech Command 8 bits [5.1] DPT_Scaling/
[18.001]
DPT_SceneControl -WCTU-
Using these objects the speech commands are configured, which were previously defined in the program
SynOhrStudio. Via the 8 bits objects e.g. percent values can be sent.
Note:
These objects are only available if the corresponding parameters „Speech commands → Speech Command X“ are
set on
Percent Value , Scene or SynOhr-Value .
Licenses: Starter, Standard, Premium. The number of varies is depending on the license.
ID Function Name Length Type Flags
147 Display Display Symbols 8 bits (u08) [non-standard] -WC---
With this object different symbols can be displayed on the display of the room controller. The value for the displayed
symbols are added from the following list:
1 = Sun
2 = Rain
4 = 1/2 Sun
8 = Cloud
16 = Frost
32 = @
64 = Lamp
A 0 disables all symbols. Also note: To see a rain cloud, rain as well as cloud must be activated. (2+8=10).
Lizenzen: Starter, Standard, Premium
ID Function Name Length Type Flags
148 Date Date 3 bytes
(d24) [11.1] DPT_Date -WCTU-
Via this object the date of the room controller can be set.
Licenses: Starter, Standard, Premium
Enertex ® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - mail@enertex.de